“I May Have a Scrap Problem” July wrap up

DD and the Grandboys spent a little over a week here at the beginning of July. DD was in the mood to sew, and sew is just what we did… twenty blocks later (with a bit of help from the Grandboys, especially Older Grandson; and even Grandad sewed a little) we had enough for the central part of a new quilt.

spider web detail

We also sewed the equivalent of seven yards of 4.5-5.5″ strips together to make a border.

In the week after they left, I sewed the blocks into rows, and the rows into a flimsy. I then added a solid inner border and the pieced outer border. Because I had learnt to do Y seams while making Attic Window blocks, I was very brave and decided to mitre the corners of the border! It turned out quite well, if I do say so myself! (No the strips aren’t meant to match at the seams — we used strips of varying widths randomly)

Spider Web mitred corner

So, may I present, for your viewing pleasure, our team effort — the flimsy that will soon become our Spider Web Quilt.

Spider Web flimsy

Sarah, of Confessions of a Fabric Addict, didn’t run the “I May Have a Scrap Problem” challenge this month but I’m still pleased with our response to the challenge I set myself. My goal, at the beginning of July, was to use scraps instead of storing them — the container has gone from filled almost to overflowing, to looking quite bare! All the strips that remain are under 5″ so I will have think of a different project for them!

How about you? What have you been doing with your scraps?

See you soon with a knitting-based post (shock!)

In the meantime, may your stitches bring you much joy.
Lynne

 

Advertisements

another finish

In November last year, I began strip-piecing monochrome 8.5″ blocks in preparation for our grandsons arrival at Christmas time. They like to sew (for short periods of time) and strips are more forgiving than squares! I had intended to make spider-webs, knowing that they would appeal, but mistakenly cut 60° triangles instead of 45° triangles — ending up with hexagons!

hexagons — no thanks

Our grandsons were not really impressed but we sewed anyway.

stack of triangles as at 31 Dec
stack of triangles as at 31 Dec

DD and I, inspired by Emily Cier’s pattern, Slices, in her book “Scrap Republic” chose to make our version of the pattern without the use of the lighter coloured blocks.

Emily Cier's "Slices"
Emily Cier’s “Slices”

When the family visited for the April school holidays, we sewed some more. By the time they left, there were only a few blocks needing completion, so I finished them.

Sewing the triangles into rows was fairly easy, once I realised I had to match the points that extended beyond the seams. Joining the rows was more complicated. I tried really hard but some are not good. However, as my mum used to say, “a blind man on a galloping horse wouldn’t notice!” Oddly enough, the more seams I sewed, the better my point matching got! 🙂

Seriously, getting the quilt finished was more important that perfectly matched points, although I would really like those. The quilt is not going to an exhibition; otherwise I would take it apart and start again. The truth is, most of the points are pretty good and a few of them are perfect. The recipient, probably a patient in the palliative care unit of the local hospital, is probably not going to be studying the points — they’ll be glad to have something bright and cheerful on the bed to keep them warm.

I love this quilt, it’s so much more exciting to me than the previous two finished quilts — more my style really in that it’s bright and a little less traditional.

Rainbow Wedges finished front

I decided to strip piece a panel for the backing — there are enough matching points where six blocks meet on the front of the quilt without adding more bulk in the backing.

Rainbow Wedges finished back

I wanted to quilt along the diamond lines with a row of double stitching but I didn’t want any other quilting to show so I decided to do horizontal in-the-ditch stitching. That was fine where the rows met but because the individual triangles were made of various width strips, it just didn’t work. I bit the bullet and did diagonal quilting across the diamonds using a clear monofilament thread.

Rainbow Wedges quilting detail

This was the first time I have used invisible thread and I was surprised that I found the right tension straight away! I had read some web pages about using invisible thread and they all suggested lowering the tension to 2 and working from there to get the correct tension. My biggest problem is that the very fine thread kept slipping out of the thread guides and, one time, it tangled so badly that I had to unthread the machine and cut off a huge knot. But the quilting was done and, like most learning experiences, the more I did the more I remembered to keep an eye on the thread guides!

Of course, then I had to remember to return the machine to ‘standard’ tension settings to put the binding on!

In the winter school holidays, which begin on 1 July, DD, the boys and I will probably make spider webs!

This post links up with Thank Goodness It’s Finished Friday which is being hosted  Whims and Fancies this week. Why not check out what other people have being working on?

What about you? Are you making quilts? Or has some other form of stitching grabbed your fancy?

Whatever your choice, may your stitches bring you much joy.
Lynne